Pioneer Sandstone

Sandstone never goes out of style. Design an elegant, earthy look with the warm colours and textures found in Sandstone Effect concrete sleepers. Featuring a block face pattern, and available in Natural or Graphite, Sandstone Effect concrete sleepers are manufactured using 40MPA concrete and reinforced with steel for strength and durability.

Click here to view sizes available

Pioneer Sandstone

Choose your size:

Choose your colour:

Additional Information

Videos

Sizes and Formats

1.58m x 200mm x 75mm

2m x 200mm x 75mm

Applications

Maximum wall height: 800mm
(3m when engineered)

Straight walls

Corners

Note: Please see your Austral Masonry representative for installation guidelines. Retaining walls must be designed to AS4678. Most councils require that any retaining walls over 1.0m in height from natural ground level are subject to building approval. Any retaining wall that is less than 1.5m away from a building or other retaining wall also requires building approval.

Post and Brackets

H POSTS / JOINER POSTS

C POSTS / ENDER POSTS

STRAIGHT FENCE BRACKETS

OFFSET FENCE BRACKETS

H POSTS / JOINER POSTS

Post Type	Wall Height	Post Height
100UC Joiner	0.4m	1.15m
	0.6m	1.15m
	0.8m	1.55m
	1.0m	1.95m
	1.2m	2.35m
	1.4m	2.75m
	1.6m	3.15m
	1.8m	3.55m
	2.0m	3.95m

C POSTS / ENDER POSTS

Post Type	Wall Height	Post Height
100PFC Ender	0.4m	0.8m
	0.6m	1.2m
	0.8m	1.6m
	1.0m	2.0m
	1.2m	2.4m
	1.4m	2.8m
150PFC Ender	1.6m	3.0m
150PFC Ender	2.0m	4.0m

STRAIGHT FENCE BRACKETS

BRACKET	FENCE TYPE	BRACKET SIZE
Straight	Colourbond	580mm x 100mm x 3mm
Straight	Timber	580mm x 100mm x 6mm

OFFSET FENCE BRACKETS

BRACKET	FENCE TYPE	BRACKET SIZE
Offset	Colourbond	580mm x 187mm x 3mm
Offset	Timber	580mm x 187mm x 6mm

Benefits of Concrete Sleepers

RANGE OF COLOURS AND FINISHES

Pioneer is available in a range of colours and three finishes to suit your style.

LOW MAINTENANCE

With Pioneer sleepers there is minimal maintenance required to keep your retaining wall looking good.

CODE COMPLIANT

Pioneer is the only product in the market that exceeds AS4678 requirements and satisfy the National Construction Code.

RUST, ROT AND TERMITE RESISTANT

Pioneer sleeper products wont rust, rot and corrode and are termite resistant.

HOT DIPPED GALVANIZED

Steel posts are hot dipped galvanized to satisfy AS/NSS4680 and ensure long lasting performance.

AFFORDABLE

In many cases, concrete sleeper retaining walls are more affordable to install than most competing retaining wall products.

EASY TO INSTALL

The concrete sleeper system is designed to be simple to install. We offer a range of accessories and easy to follow instructions to make your project simple and straight forward.

LONG LASTING

Pioneer is offered with a 35 Year product warranty and 60 Year design life. When built to engineers specification Pioneer walls are rated to 5kPa.

STRONG AND DURABLE

Pioneer walls are rated to 5kPa meaning they are made to be strong, durable and capable of withstanding significant force for outstanding durability.

Installation Overview

1. PREPARE THE AREA

Clear and level your site where you plan to build the retaining wall. Ensure you leave 200mm behind the retaining wall area for backfill.

2. ALIGNMENT

Place a star piquet or peg at both ends of the proposed wall. Attach two string lines at each end of the wall, top and bottom, to keep your wall aligned.

3. MARK OUT HOLE POSITIONS

Starting from one end of the wall, mark a cross on the ground at intervals with their centre being approximately 15mm more than the length of the sleeper.

When utilizing the fence bracket system allow an extra 20mm again to ensure the sleepers have clearance with the nuts and bolts.

For example: If you are using 1530mm sleepers the hole centres should be 1550mm apart - note, this will vary on the length of sleeper used.

4. AUGER HOLES AND POUR CONCRETE

Auger holes as per your engineers specifications as approved by council.
Pour concrete into holes, one at a time.
Make the concrete stiff. If using readymix concrete, order 20/20, 60 slump.
Set your post by lowering into ground until level with the top string lines.
Ensure there is a minimum lean back of 30mm for every 1.0m in height.

5. CHECKING POSTS

Use a spirit level to make sure all your posts are aligned with the string line and are perpendicular on the sides.
It is also important to measure the remaining distance to the top of your steel posts, to ensure the sleepers finish flush with the top of the posts.
If required, lay a concrete pad on both sides of the steel post.

6. AG PIPE AND BACKFILL

Allow the concrete to cure for two to three days before you place your sleepers in. Place ag pipe at the base, then backfill with gravel to 200mm from the top.

7. SOIL PLUG

A soil plug is then placed in, to fill the wall to the top.

*Retaining walls must be designed to AS4678
*Most councils require that any retaining walls over 1.0m in height from natural ground level are subject to building approval.
* Any retaining wall that is less than 1.5m away from a building or other retaining wall also requires building approval.

ENQUIRE NOW

DOWNLOAD BROCHURE

VISIT A DISPLAY

Videos